SRS Engineering | Parts

Covering Sutton and all surrounding South London areas as local specialists in automotive engineering, we can now offer you a convenient parts supply service. We can source and supply top-branded components for private and trade customers with the confidence to undertake their own engine rebuilds. You can use our parts with confidence knowing that in the unlikely event of them failing, all components sold by SRS carry full manufacturer warranties.

Below, we look at some of the most popular parts we can supply to you.

If you would like to know more about stock availability and price, please take the time to contact us and we’ll be more than happy to advise you.

Head Gasket Sets – Suitable for cylinder head overhauls and repairs, head gasket sets contain a full set of gaskets for a specific make and model. The gaskets seal gaps between engine blocks and cylinders to stop leakages.

Head Bolt Sets – If a vehicle has damaged or worn head bolts, we strongly recommend replacing them. Our sets contain the required number of head bolts to connect the engine block, the cylinder head and the gasket.

Engine Bearings – The main bearings in the engine keep the crankshaft in place and support the connecting rods, but still allow the crankshaft to turn freely. We can now supply engine bearings across all makes and models.

Piston Rings – You can also use SRS Engineering for the supply of piston rings. These attach to the piston’s outer diameter and seal combustion chambers so that there is only the absolute minimum of gas loss to the crankshaft.

Camshafts – The engine’s camshaft is a rod (or a shaft) with a row of pointed cams (or lobes). These push against the valves as the camshaft rotates to open the valves. Springs then return the valves to their normal position.

Engine Valves – The valves in an engine can open and close the combustion chamber to control either the fresh air intake, or the air/fuel mixture intake. We can now supply engine valves for your own gearbox rebuilding work.

Hydraulic Lifters – The oil pressure of a car adjusts the plunger of a hydraulic lifter to take up the clearance inside the main valve train. This reduces the amount of noise produced by the engine to lessen overall wear and tear.

Because we supply to private motorists and the trade, SRS Engineering can help you to complete rebuilds with quality parts and components. We source from market-leading brands to ensure optimal performance from all parts and components once fitted, and we always supply at a competitive price.