Rejuvenating Engines via Cylinder Head Overhauls in Sutton & All Nearby Locations | SRS Engineering
A cylinder head is a crucial component in an internal combustion engine. It is responsible for controlling the flow of air and fuel into the cylinders and allowing exhaust gases to escape. Over time, the cylinder head can become worn, leading to poor engine performance, reduced power, and in some circumstances even total engine failure. When this happens, you have a few options. You could choose to purchase a new one, but this can be expensive and is also not as eco-friendly as the second option: cylinder head overhaul. This is a specialist service offered at certain workshops, including SRS Engineering in Sutton.
Cylinder Head Overhauls Explained
The first step in cylinder head overhauls is removing the cylinder head from the engine, by disconnecting various hoses, wires, and other connected components. Once removed, it will be carefully inspected for signs of damage, wear, or cracks. If any issues are found, often following our cylinder head pressure testing service, the head may be found to require repair or replacement.
The next step in cylinder head overhauls sees the valves removed from the cylinder head. These are subsequently inspected for wear and replaced if necessary. The valve seats are also inspected and if it’s necessary, are resurfaced to ensure a proper seal. Next up, our technicians check the valve guides for wear and tear. These can also be replaced if this wear is deemed to be excessive; as with all the services we provide clients in Sutton, Epsom, Croydon, Kingston, Streatham and Wimbledon, this is a bespoke procedure and only the required works will be undertaken, to keep costs fair and honest.
To remove any debris or contaminants we then thoroughly clean the cylinder head, ensuring the engine runs smoothly and efficiently once work is complete. Finally, the cylinder head is reassembled with new gaskets and seals. The valves are carefully installed and adjusted to ensure proper clearance and timing. The cylinder head is then bolted back onto the engine, and all the hoses and wires are reconnected.
So if you’re looking to save money and raw materials by choosing cylinder head overhauls over replacement, consider visiting SRS Engineering in Sutton. Alternatively, contact us to discuss the possibility of a mobile visit, which is available in locations including Sutton, Epsom, Croydon, Kingston, Streatham and Wimbledon.